DSP SWITCHES AND GAUGE MOUNTS
NOW YOU CAN LOCK YOUR SWITCHABLE TUNING. For EFILive users and SIGNATURE Custom Tuning. The NEW Keylock DSP5 and DSP2 switches allow you to place your switch anywhere you want. They have a stealthy flat profile and are all metal construction. Elect Chrome or Black anodize. Each is built to a higher standard using 
only teflon high temperature 20 gauge wire, PLUS each comes with wire loom for a professional installation. Very easy to install, complete color instructions provided. These are features you are usually left to fend for yourself on.
SMART ENGINEERING. The key is the knob. Previously available DSP switches used circuitry that made the CCW 
position the failsafe position. In other words, if your switch failed or was tampered with, the CCW failsafe position is what your tuning would become. This was a hardship that prevented you from using the failsafe for a theft or limp mode. It meant also that you needed to have your high power tune in the CCW position, all to be sure you would not be stranded in the event of switch failure. This has been changed with this generation of switches, and now the full CW position is the failsafe position.
NEW OPTIONS. These switches are available in different lengths, so you can now mount it anywhere you want to. The 6-7′ length is sufficient for dash locations, and is the standard length. Also available in 8′-9′ as well as 11-12′. Each switch comes standard with one nickel/chrome key. A black overmolded key is available.
OUT OF THE BOX. The newly introduced DSP6 and DSP2 2-circuit switches allow you to control another device via solenoid or relay. This is useful for water-methanol injection as well as Nitrous use. It allows you to combine specific tuning requirements with the enabling of that circuit. This came about from the reality that the use of certain augmentations require different tuning than the diesel-only combustion requires.
PROTECTION. The DSP5 Keylock allows you to lock away your high performance tunes. For example, in our Custom Tuning package, if you purchase the anti-theft “kill switch” mode, valet mode or bait car “limp” modes, you can lock them. This beats trying to hide a bulky knob switch. This can help you with the adolescent driver also, by limiting the available power, speed, and rpm. And at $59, it is ultra-affordable. Or a $39 upgrade when purchased with any Custom Tuning package.
The billet gauge mounts (shown) are machined specifically for these keylock switches, specifically for 01-05 2500 and 3500 trucks, in black and brushed aluminum.
I have a limited number of the pictured scan gauges also, for 01-05. Please email for pricing.
DSP5 KNOB and KEYLOCK DSP5 AND DSP2 SWITCHES
CHROME KL ,WITH STANDARD NICKEL KEY
GAUGE MOUNT COMBINATIONS
DSP5 KNOB SWITCH MOUNTED OVERHEAD
PILLAR MOUNTED KEYLOCK